دانشگاه شهید مدنی آذربایجان

 آمار

تعداد نشریات5
تعداد شماره‌ها116
تعداد مقالات1,358
تعداد مشاهده مقاله1,364,725
تعداد دریافت فایل اصل مقاله1,321,722
Khameneh asl, Shahab, Behjat, Saeed. (1397). The Effect of Pt thin films on efficiency of the carbon based catalysts for PEM fuel cells. , 1(2), 1-12. doi: 10.22049/cic.2018.26191.1019
Shahab Khameneh asl; Saeed Behjat. "The Effect of Pt thin films on efficiency of the carbon based catalysts for PEM fuel cells". , 1, 2, 1397, 1-12. doi: 10.22049/cic.2018.26191.1019
Khameneh asl, Shahab, Behjat, Saeed. (1397). 'The Effect of Pt thin films on efficiency of the carbon based catalysts for PEM fuel cells', , 1(2), pp. 1-12. doi: 10.22049/cic.2018.26191.1019
Khameneh asl, Shahab, Behjat, Saeed. The Effect of Pt thin films on efficiency of the carbon based catalysts for PEM fuel cells. , 1397; 1(2): 1-12. doi: 10.22049/cic.2018.26191.1019

The Effect of Pt thin films on efficiency of the carbon based catalysts for PEM fuel cells

Communications In Catalysis
مقاله 1، دوره 1، شماره 2، اسفند 2018، صفحه 1-12    اصل مقاله (878.93 K)
نوع مقاله: Original Article
شناسه دیجیتال (DOI): 10.22049/cic.2018.26191.1019
نویسندگان
Shahab Khameneh asl* 1؛ Saeed Behjat2
1Tabriz university
2Naft research center
چکیده
With increasing pollution and decrease in global reservoirs of fossil fuels, a lot of interest has been attracted to fuel cells as efficient and clean energy sources. Polymeric (membrane) fuel cells are special type of fuel cells, which can be built in small dimensions and power. These cells use hydrogen (and oxygen or air) and produce water. In these cells, platinum is used as electrode (and electro catalyst) both in anode and cathode, due to its low overvoltage for both hydrogen and oxygen. To increase the efficiency of these coatings, it is best to produce platinum particles with maximum area and it automatically leads to nanometric particles. In this thesis, platinum particles are electrodeposited first on Floride doped Tin Oxide (FTO) and then on graphite. Electro deposition is conducted via DC and pulse methods. Floride doped Tin Oxide (FTO) samples have been examined using voltametry in 0.5M H2SO4 and graphite samples have been examined in 0.5 M H2SO4 + 0.5 M CH3OH. Specific area of platinum on Floride doped Tin Oxide (FTO) substrates has been calculated. In graphite substrates, comparative analysis has been performed. Prepared samples have been examined using scanning electron microscope. For Floride doped Tin Oxide (FTO) sample, AFM test has been performed to approve the results of SEM. According to results, Platinum particles with approximate diameter of 30 nanometers have been successfully coated on Floride doped Tin Oxide (FTO) and graphite.
کلیدواژه‌ها
Nanometric coating؛ Pulse Electrodeposition؛ Pt/C؛ Polymeric؛ Fuel cells
آمار
تعداد مشاهده مقاله: 835
تعداد دریافت فایل اصل مقاله: 762


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب