تعداد نشریات | 5 |
تعداد شمارهها | 108 |
تعداد مقالات | 1,228 |
تعداد مشاهده مقاله | 1,147,660 |
تعداد دریافت فایل اصل مقاله | 1,007,047 |
A new strategy to increase comonomer incorporation in LLDPE synthesis using Ziegler-Natta catalysts | ||
Communications In Catalysis | ||
مقاله 1، دوره 1، شماره 1، اردیبهشت 2018، صفحه 1-10 اصل مقاله (561.62 K) | ||
نوع مقاله: Original Article | ||
شناسه دیجیتال (DOI): 10.22049/cic.2018.13736 | ||
نویسندگان | ||
Reza Bazvand1؛ Naeimeh Bahri-Laleh* 2؛ Mehdi Nekoomanesh2؛ Hossein Abedini3؛ Ahad Hanifpour1 | ||
1Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI) | ||
2Polymerization Engineering Department, Iran Polymer and Petrochemical Institute (IPPI), P.O. Box 14965/115, Tehran, Iran | ||
3Modeling and Control Department, Iran Polymer & Petrochemical Institute, P.O. Box 14965/115, Tehran, Iran. | ||
چکیده | ||
Effect of FeCl3 and FeCl3/SiCl4-doping on the performance of MgCl2(ethoxide type)/TiCl4/TEAL catalytic system was evaluated in the linear low density polyethylene (LLDPE) synthesis using 1-hexene as the comonomer. Results revealed that FeCl3/SiCl4 modified catalytic system has better performance in terms of catalyst activity and comonomer incorporation when compared with unmodified catalyst or the catalytic system in the presence of FeCl3 alone. In fact, the introduction of FeCl3 doper, in its optimum amount of 10 wt. %, together with SiCl4 induced better catalytic performance with 212 and 90 % increase in catalyst activity and 1-hexene incorporation, respectively. Copolymers characterization showed increased bulk density together with decreased crystallinity and Tm in the polymers from modified catalysts. Overall results showed that, new catalytic system represented in this work, is a good candidate for large scale LLDPE production with high comonomer amount. | ||
کلیدواژهها | ||
LLDPE؛ modified support؛ FeCl3؛ Ziegler-Natta catalyst؛ 1-hexene | ||
آمار تعداد مشاهده مقاله: 1,359 تعداد دریافت فایل اصل مقاله: 1,460 |